Configuring Upe; Checking The Configuration - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN

7.5.3 Configuring UPE

This part describes how to configure a UPE to establish the VSI peer relationships with SPEs.
Context
The configuration of the UPE is similar to that on the PE of the VPLS fully-connected network.
The difference is that the UPE sets up connections only with the connected SPEs.
For the detailed configuration, see

7.5.4 Checking the Configuration

After HVPLS in LDP mode is configured, you can view information about local VSIs, remote
VSIs, outgoing interfaces of VSI PWs, and the tunnel policy referenced by the VSIs.
Prerequisite
The configurations of the LDP HVPLS function are complete.
Procedure
l
l
l
l
----End
Example
Run the display vsi [ name vsi-name ] [ verbose ] command. You can view that the item "VSI
State" is displayed as "up". If verbose is selected, the item "Signaling" is displayed as "ldp" and
the item "VSI State" is displayed as "up". This means that the configuration succeeds. For
example:
<Quidway> display vsi name vsi123 verbose
***VSI Name
Issue 01 (2011-07-15)
Run the display vsi [ name vsi-name ] [ verbose ] command to check information about
the VPLS VSI.
Run the display vsi pw out-interface [ vsi vsi-name ] command to check information about
the outgoing interface of the VSI PW.
Run the display l2vpn vsi-list tunnel-policy policy-name command to check information
about the tunnel policy used by the VSI.
Run the display vsi remote ldp [ router-id ip-address ] [ pw-id pw-id ] command to check
information about the remote VSI.
Administrator VSI
Isolate Spoken
VSI Index
PW Signaling
Member Discovery Style : static
PW MAC Learn Style
Encapsulation Type
Encapsulation Type
MTU
Diffserv Mode
Mpls Exp
DomainId
Domain Name
Ignore AcState
Multicast Fast Swicth
Create Time
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.4 Configuring Martini
: vsi123
: no
: disable
: 0
: ldp
: unqualify
: vlan
: vlan
: 1500
: uniform
: --
: 255
:
: disable
: disable
: 0 days, 3 hours, 30 minutes, 31 seconds
7 VPLS Configuration
VPLS.
699