Huawei quidway s7700 Configuration Manual page 746

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
established with LDP as the VPLS signaling, and VPLS is configured to implement the
interworking between CE1 and CE2.
Figure 7-12 Networking diagram for configuring Martini VPLS
Device
PE1
PE2
P
CE1
CE2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Issue 01 (2011-07-15)
Loopback1
1.1.1.9/32
GE2/0/0
PE1
GE1/0/0
GE1/0/0
CE1
Interface
GigabitEthernet 1/0/0
GigabitEthernet 2/0/0
Loopback1
GigabitEthernet 1/0/0
GigabitEthernet 2/0/0
Loopback1
GigabitEthernet 1/0/0
GigabitEthernet 2/0/0
Loopback1
GigabitEthernet 1/0/0
GigabitEthernet 1/0/0
Configure a routing protocol on the backbone network to implement the interworking
between devices.
Establish remote LDP sessions between PEs.
Establish tunnels between PEs to transmit user data.
Enable MPLS L2VPN on PEs.
Create VSIs on PEs, use the signaling protocol as LDP, and bind VSIs to related AC
interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Loopback1
2.2.2.9/32
GE2/0/0
GE1/0/0
P
VLANIF Interface
VLANIF 10
VLANIF 20
-
VLANIF 30
VLANIF 40
-
VLANIF 20
VLANIF 30
-
VLANIF 10
VLANIF 40
7 VPLS Configuration
Loopback1
3.3.3.9/32
PE2
GE1/0/0
GE2/0/0
GE1/0/0
CE2
IP Address
-
168.1.1.1/24
1.1.1.9/32
169.1.1.2/24
-
3.3.3.9/32
168.1.1.2/24
169.1.1.1/24
2.2.2.9/32
10.1.1.1/24
10.1.1.2/24
731