Huawei quidway s7700 Configuration Manual page 27

Smart routing switch
Hide thumbs Also See for quidway s7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Procedure
l
l
l
l
----End
Example
Run the display tunnel-policy command. If the configuration of the tunnel policy is displayed,
it means the configuration succeeds. For example:
[Quidway] display tunnel-policy policy1
Tunnel Policy Name
---------------------------------------------------------------------
policy1
Run the display tunnel-policy command. If the tunnel policy of the VPN instance is displayed,
it means the configuration succeeds. In the following example, you can view the tunnel policy
of the VPN named vpna is policy1.
[Quidway] display ip vpn-instance verbose
Total VPN-Instances configured : 1
VPN-Instance Name and ID : vpna, 1
Create date : 2007/09/20 12:03:31 UTC-08:00
Up time : 0 days, 05 hours, 23 minutes and 09 seconds
Route Distinguisher : 1:1
Export VPN Targets :
Import VPN Targets :
Label Policy : label per route
Tunnel Policy : policy1
Log Interval : 5
Interfaces : Vlanif10
Run the display ip routing-table vpn-instance vpn-instance-name verbose command, and you
can view the information about the tunnel that transmits the VPN routes. For example:
[Quidway] display ip routing-table vpn-instance vpna 11.11.12.0 verbose
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Table : vpna
Summary Count : 1
Destination: 11.11.12.0/24
RelayNextHop: 0.0.0.0
RelayNextHop: 10.1.1.1
Issue 01 (2011-07-15)
Run the display tunnel-policy tunnel-policy-name command to check configuration of the
tunnel policy.
Run the display ip vpn-instance verbose [ vpn-instance-name ] command to check tunnel
policy of the VPN instance.
Run the display ip routing-table vpn-instance vpn-instance-name [ ip-address ]
verbose command to check the tunnel that transmits the routes of the VPN instance.
Run the display tunnel-info tunnel-id tunnel-id command to check information about a
specified tunnel.
Select-Seq
LSP
Protocol: BGP
Preference: 255
NextHop: 6.6.6.6
State: Active Adv Relied
Tag: 0
Label: 11264
IndirectID: 0x3
TunnelID: 0x10002
TunnelID: 0x10000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1:1
1:1
Process ID: 0
Cost: 0
Neighbour: 6.6.6.6
Age: 00h01m04s
Priority: low
QoSInfo: 0x0
Interface: Tunnel1/0/1
Flags: RD
Interface: Vlanif15
Flags: RD
1 VPN Tunnel Management Configuration
Load balance No
1
12

Advertisement

Table of Contents
loading

Table of Contents