Binding A Vsi To An Ac Interface; Checking The Configuration - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN

7.9.4 Binding a VSI to an AC Interface

According to different AC link types, you can bind a VSI to AC interfaces in different views.
Context
For the configuration procedure, see "Binding the VSI to the Interface Connected with CE".

7.9.5 Checking the Configuration

After dual-homed Kompella VPLS is configured, you can view information about BGP VPLS
peers, VPLS label blocks, and VPLS connections.
Prerequisite
The configurations of the dual-homed Kompella VPLS function are complete.
Procedure
l
l
l
l
----End
Example
After the configurations, run the display bgp vpls peer command on the PE or the ASBR. You
can view that the status of the BGP VPLS peer relationship between PEs is "Established". For
example:
<Quidway> display bgp vpls peer
BGP local router ID : 1.1.1.1
Local AS number : 100
Total number of peers : 1
Peer
4.4.4.4
Run the display bgp vpls all command on the PE. You can view information about the VPLS
label block on the PE. For example:
<Quidway> display bgp vpls all
BGP Local Router ID : 1.1.1.1, Local AS Number : 100
Status codes : * - active, > - best
BGP.VPLS : 2 Label Blocks
--------------------------------------------------------------------------------
Route Distinguisher: 100:1
--------------------------------------------------------------------------------
>
--------------------------------------------------------------------------------
Route Distinguisher: 200:1
Issue 01 (2011-07-15)
Run the display bgp vpls group [ group-name ] command to check information about BGP
VPLS peer groups on the PE or the ASBR.
Run the display bgp vpls peer [ ipv4-address verbose ] command to check information
about BGP VPLS peers on the PE or the ASBR.
Run the display bgp vpls all command to check information about the BGP VPLS label
blocks on the PE or ASBR.
Run the display vpls connection [ bgp | vsi vsi-name ] [ down | up ] [ verbose ] command
to check information about the VPLS connection on the PE.
V AS
4 200
SiteID Offset NextHop
1 0 0.0.0.0
SiteID Offset NextHop
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Peers in established state : 1
MsgRcvd MsgSent OutQ
5 8
Range LabBase TunnelID
5 35840 0x0
Range LabBase TunnelID
7 VPLS Configuration
Up/Down State PrefRcv
0 00:02:04 Established
FromPeer
0.0.0.0
FromPeer
0
MHPref
0
MHPref
716