Huawei quidway s7700 Configuration Manual page 621

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.
------------------------------------------------------------------------------
PeerID
------------------------------------------------------------------------------
1.1.1.9:0
2.2.2.9:0
4.4.4.9:0
5.5.5.9:0
------------------------------------------------------------------------------
TOTAL: 4 session(s) Found.
<S-PE> display mpls ldp peer
LDP Peer Information in Public network
A '*' before a peer means the peer is being deleted.
------------------------------------------------------------------------------
PeerID
------------------------------------------------------------------------------
1.1.1.9:0
2.2.2.9:0
4.4.4.9:0
5.5.5.9:0
------------------------------------------------------------------------------
TOTAL: 4 Peer(s) Found.
<S-PE> display mpls lsp
----------------------------------------------------------------------
----------------------------------------------------------------------
FEC
3.3.3.9/32
1.1.1.9/32
1.1.1.9/32
2.2.2.9/32
2.2.2.9/32
4.4.4.9/32
4.4.4.9/32
5.5.5.9/32
5.5.5.9/32
Step 4 Create and configure the PW template.
Create a PW template on each U-PE. Enable the CW and LSP ping function.
# Configure U-PE1.
[U-PE1] pw-template pwt
[U-PE1-pw-template-pwt] peer-address 3.3.3.9
[U-PE1-pw-template-pwt] control-word
[U-PE1-pw-template-pwt] quit
# Configure U-PE2.
[U-PE2] pw-template pwt
[U-PE2-pw-template-pwt] peer-address 3.3.3.9
[U-PE2-pw-template-pwt] control-word
[U-PE2-pw-template-pwt] quit
Step 5 Create a VC connection.
Enable MPLS L2VPN on U-PE1, U-PE2, and S-PE.
Issue 01 (2011-07-15)
Status
Operational DU
Operational DU
Operational DU
Operational DU
TransportAddress
1.1.1.9
2.2.2.9
4.4.4.9
5.5.5.9
LSP Information: LDP LSP
In/Out Label
3/NULL
NULL/1024
1024/1024
NULL/3
1025/3
NULL/3
1027/3
NULL/1027
1026/1027
NOTE
You can configure a dynamic PW without using a PW template. If the PW template is not used, PW
connectivity cannot be verified and path information of the PW cannot be collected. That is, the ping vc
and tracert vc commands cannot be used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LAM SsnRole SsnAge
Active 0000:00:14
Active 0000:00:14
Passive 0000:00:05
Passive 0000:00:12
DiscoverySource
Remote Peer : 1.1.1.9
Vlanif30
Vlanif40
Remote Peer : 5.5.5.9
In/Out IF
-/-
-/Vlanif30
-/Vlanif30
-/Vlanif30
-/Vlanif30
-/Vlanif40
-/Vlanif40
-/Vlanif40
-/Vlanif40
6 PWE3 Configuration
KASent/Rcv
57/57
56/56
22/22
52/52
Vrf Name
606