Example For Configuring Dynamic Vlls To Access A Vpls Network - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
7.13.6 Example for Configuring Dynamic VLLs to Access a VPLS
Network
Networking Requirements
As shown in
CE2 access the full-meshed VPLS network through UPEs.
Figure 7-17 Networking of VPLS access through the dynamic VLL
100.1.3.1/24
Device
SPE1
SPE2
UPE1
UPE2
Issue 01 (2011-07-15)
Figure 7-17, VLLs are set up between UPEs and SPEs in Martini mode. CE1 and
Loopback1
1.1.1.9
GE1/0/0
VLANIF 10
100.1.1.1/24
SPE1
GE2/0/0
VLANIF 30
GE2/0/0
VLANIF 30
100.1.3.2/24
UPE1
GE1/0/0
VLANIF 50
GE1/0/0
VLANIF50
10.1.1.1/24
CE1
Interface
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
GigabitEthernet2/0/0
loopback1
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Loopback1
2.2.2.9
GE1/0/0 GE2/0/0
VLANIF 10 VLANIF 20
P
100.1.1.2/24 100.1.2.1/24
VLANIF interface
VLANIF 10
VLANIF 30
-
VLANIF 20
VLANIF 40
-
VLANIF 50
VLANIF 30
-
VLANIF 60
7 VPLS Configuration
Loopback1
3.3.3.9
GE1/0/0
VLANIF 20
100.1.2.2/24
SPE2
GE2/0/0
VLANIF 40
100.1.4.1/24
GE2/0/0
VLANIF 40
100.1.4.2/24
GE1/0/0
VLANIF 60
GE1/0/0
VLANIF 60
10.1.1.2/24
CE2
IP address
100.1.1.1/24
100.1.3.1/24
1.1.1.9/32
100.1.2.2/24
100.1.4.1/24
2.2.2.9/32
-
100.1.3.2/24
4.4.4.9/32
-
UPE2
772