Huawei quidway s7700 Configuration Manual page 416

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
[Hub-PE-bgp] peer 3.3.3.9 connect-interface loopback 1
[Hub-PE-bgp] ipv6-family vpnv6
[Hub-PE-bgp-af-vpnv6] peer 1.1.1.9 enable
[Hub-PE-bgp-af-vpnv6] peer 3.3.3.9 enable
[Hub-PE-bgp-af-vpnv6] quit
After the configuration, run the display bgp vpnv6 all peer command on each PE, and you can
see that the MP-IBGP peer relation between the PEs is in Established state.
Step 7 Verify the configuration.
After the preceding configurations, check the BGP IPv6 VPN routes on the Spoke-PE. You can
find that the default route of vpn_out on the Hub-PE is advertised to each Spoke-PE.
Take the display on Spoke-PE1 as an example.
[Spoke-PE1] display bgp vpnv6 all routing-table
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
Total number of routes from all PE: 2
Route Distinguisher: 100:22
*>i Network
NextHop
MED
Label
Path/Ogn : i
*>i Network
Total routes of vpn6-instance vpna: 6
*>i Network
*>
*
*>
*>i Network
Issue 01 (2011-07-15)
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
: ::
: ::FFFF:3.3.3.3
: 0
: 15365
: 2004::
NextHop : ::FFFF:3.3.3.3
MED : 0
Label : 15364
Path/Ogn : ?
: ::
NextHop : ::FFFF:3.3.3.3
MED : 0
Label : 15365
Path/Ogn : i
Network : 2001::
NextHop : ::
MED : 0
Label : NULL
Path/Ogn : ?
NextHop : 2001::1
MED : 0
Label : NULL
Path/Ogn : 65410 ?
Network : 2001::2
NextHop : ::
MED : 0
Label : NULL
Path/Ogn : ?
: 2004::
NextHop : ::FFFF:3.3.3.3
MED : 0
Label : 15364
Path/Ogn : ?
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i - internal, s - suppressed, S - Stale
4 BGP MPLS IPv6 VPN Configuration
PrefixLen : 0
LocPrf : 100
PrefVal : 0
PrefixLen : 64
LocPrf : 100
PrefVal : 0
PrefixLen : 0
LocPrf : 100
PrefVal : 0
PrefixLen : 64
LocPrf :
PrefVal : 0
LocPrf :
PrefVal : 0
PrefixLen : 128
LocPrf :
PrefVal : 0
PrefixLen : 64
LocPrf : 100
PrefVal : 0
401