Huawei quidway s7700 Configuration Manual page 108

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Procedure
Step 1 Configure Switch A and Switch B to implement the interworking between the two devices.
The detailed procedures are not mentioned here.
Step 2 Configure a tunnel on Switch A and enable the Keepalive function.
<SwitchA> system-view
[SwitchA] interface tunnel 1/0/0
[SwitchA-Tunnel1/0/0] ip address 40.1.1.1 255.255.255.0
[SwitchA-Tunnel1/0/0] tunnel-protocol gre
[SwitchA-Tunnel1/0/0] source 20.1.1.1
[SwitchA-Tunnel1/0/0] destination 30.1.1.2
[SwitchA-Tunnel1/0/0] keepalive period 20 retry-times 3
[SwitchA-Tunnel1/0/0] quit
Step 3 Configure a tunnel on Switch B and enable the Keepalive function.
<SwitchB> system-view
[SwitchB] interface tunnel 1/0/0
[SwitchB-Tunnel1/0/0] ip address 40.1.1.2 255.255.255.0
[SwitchB-Tunnel1/0/0] tunnel-protocol gre
[SwitchB-Tunnel1/0/0] source 30.1.1.2
[SwitchB-Tunnel1/0/0] destination 20.1.1.1
[SwitchB-Tunnel1/0/0] keepalive period 20 retry-times 3
[SwitchB-Tunnel1/0/0] quit
Step 4 Verify the configuration.
# The tunnel interface on Switch A can successfully ping the tunnel interface on Switch B.
<SwitchA> ping -a 40.1.1.1 40.1.1.2
PING 40.1.1.2: 56
--- 40.1.1.2 ping statistics ---
# Enable the debugging of the Keepalive messages on Switch A and view information about the
Keepalive messages.
<SwitchA> terminal monitor
<SwitchA> terminal debugging
<SwitchA> debugging tunnel keepalive
Oct 26 2008 20:18:54.860.1 SwitchA TUNNEL/7/debug:GRE_KEEP:Judge keepalive fin
ished. Received keepalive response packet from peer router.
Oct 26 2008 20:18:54.860.2 SwitchA TUNNEL/7/debug:GRE_FWD: Receive the respons
e keepalive packet on mainboard successfully, keepalive finished.
Oct 26 2008 20:19:15.340.1 SwitchA TUNNEL/7/debug:GRE_KEEP:Judge keepalive fin
ished. Received keepalive response packet from peer router.
Oct 26 2008 20:19:15.340.2 SwitchA TUNNEL/7/debug:GRE_FWD: Receive the respons
e keepalive packet on mainboard successfully, keepalive finished.
----End
Configuration Files
l
Issue 01 (2011-07-15)
data bytes, press CTRL_C to break
Reply from 40.1.1.2: bytes=56 Sequence=1 ttl=255 time=9 ms
Reply from 40.1.1.2: bytes=56 Sequence=2 ttl=255 time=7 ms
Reply from 40.1.1.2: bytes=56 Sequence=3 ttl=255 time=7 ms
Reply from 40.1.1.2: bytes=56 Sequence=4 ttl=255 time=7 ms
Reply from 40.1.1.2: bytes=56 Sequence=5 ttl=255 time=7 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 7/7/9 ms
Configuration file of Switch A
#
sysname SwitchA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 GRE Configuration
93