System Time Configuration Example; Network Requirements; Configuring The System Time - HP FlexNetwork NJ5000 User Manual

Figure 30 Setting the daylight saving time

System time configuration example

Network requirements

As shown in
•
The local clock of Device A is set as the reference clock.
•
Switch B operates in client mode, and uses Device A as the NTP server.
Configure NTP authentication on Device A and Switch B so that Switch B is to be synchronized to
Device A.
Figure 31 Network diagram

Configuring the system time

Configure the local clock as the reference clock, with the stratum of 2. Enable NTP
1.
authentication, set the key ID to 24, and specify the created authentication key aNiceKey as a
trusted key. (Details not shown.)
On Switch B, configure Device A as the NTP server:
2.
a. Select Device > System Time from the navigation tree.
b. Click the Network Time Protocol tab.
c. Enter 24 in the ID field, enter aNiceKey in the Key String field for key 1, enter 1.0.1.11 in
the NTP Server 1 field, and enter 24 in the Reference Key ID field.
d. Click Apply.
Figure 31:
38