Upgrading System Software Without Performing Issu (Method 1); Upgrading System Software Without Performing Issu (Method 2) - HP 5830 Series Configuration Manual

Step
5. Return to user view.
6. Upgrade BootWare on
member switches.
7. Reboot the member switches.
Upgrading system software without performing
ISSU (method 1)
Step
1. Use FTP or TFTP to transfer the
system software image to the
root directory of the master
device's flash.
2. Copy the system software
image to the root directory of
each subordinate switch's
flash.
3. Specify the file as the startup
software image for each
member switch in user view.
4. Reboot the entire IRF fabric.
Upgrading system software without performing
ISSU (method 2)
This method simplifies the software upgrade procedure described in
performing ISSU (method
software image to a member device and specifying the file as the system software image to be used at
the next startup.
To use this method to upgrade system software:
Command
quit
bootrom update file file-url slot
slot-number-list
reboot
Command
See "Configuring
"Configuring TFTP."
copy fileurl-source fileurl-dest
boot-loader file file-url slot { all |
slot-number } { main | backup }
reboot
1)" for IRF fabrics. It provides one command to complete copying a system
97
Remarks
N/A
In FIPS mode, the file must pass
authenticity verification before it
can be set as the BootWare image
file.
N/A
Remarks
The image file must be saved in the
FTP" or
root directory for a successful
upgrade.
You can assign different names to
the image files on different member
switches, but must make sure the
image versions are the same.
In FIPS mode, the specified file
must pass authenticity verification
before it can be set as a startup
system software image
N/A
"Upgrading system software without