Fig 1-50 Tray 1 & Tray 2 Paper Size Sensors - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 1-20 Tray 1 & Tray 2 Paper Size Sensors
(PL 3.1~PL 3.4)
Fig 1-50 Tray 1 & Tray 2 Paper Size Sensors
Use this procedure to remove and replace the Paper Size Sensors
Note
for Bins 1 and 2.
Removal
1.
Remove either Paper Tray 1 or Paper Tray 2 from the printer.
Do not lay paper Bins flat on carpeted floors. The carpet can
Caution
grab the spring on the bottom of the Tray and, when lifted, the
spring may pop off, rendering the paper Tray useless.
2.
Disconnect the P/J from the Size Sensor Board.
3.
Remove the screw securing the Size Sensor Board to the printer frame, pull the
board straight out and remove it from the frame.
1-204 DocuPrint N4525 Network Laser Printer - Service Guide
Paper Size Sensor Board
S4525-93