Serial Menu - Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual

Serial Menu

Sets options for the serial port connection. This menu only appears if the printer has the
optional RS-232 serial interface card installed.
Note
For these changes to take place, you must either power the machine
then power it back On, or restart the printer from the
Serial Menu Items
Menu Items Description
Port Enable Sets the serial port.
Values:
Port Timeout Sets the time for determining when to end an incomplete print job and poll
the next port in the polling sequence. This menu item also causes an implicit
job end (such as Control D in PostScript or <ESC> E in PCL) and invokes the
emulation functions associated with this action (e.g., formfeed, reset, etc.).
Values (in seconds):
The value changes by 1 each time you press either Value key (labeled 3 or 7).
Hold down either key to scroll quickly through the values.
Serial PDL Sets the default Print Description Language emulation for the serial port.
Values:
Flow Control Set the Flow Control handshaking parameters for the serial port.
Values:
Baud Rate Sets the baud rate for the serial port.
Values:
Binary PS Sets the binary mode of PostScript for jobs received on this port.
Values:
Advanced Features and Troubleshooting Manual
On (default)
Off
- (default is )
5 300 30
(default)
Auto
PCL
PostScript
XON/XOFF
Robust XON/XOFF
(default)
Hardware
115200 9600
57600 4800
38400 2400
28800 1200
19200 600
On
(default)
Off
Control Panel Menus
Print or Job
(default)
and
Off
Menus.
23