Enabling The Tls Connection In Scopia Management - RADVision Scopia TIP Gateway Deployment Manual

7. To encrypt communications with Scopia Management which acts as the SIP server, select
8. Continue with

Enabling the TLS Connection in Scopia Management

About this task
You can configure your Scopia Management to use the TLS connection by modifying the configuration
of the B2BUA component of the Scopia Management.
Perform this procedure only if you want to secure your video network using TLS.
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for usage.
For more information, consult your local reseller.
Procedure
1. Navigate to <install_dir>\sipserver\conf.
2. Open the UpdatedSIPConfig.xml file in a text editor.
3. Configure FQDN of the B2BUA component by setting the value the <B2bFQDN> element as
Deployment Guide for Scopia TIP Gateway Version 8.2
e. Select Save.
f. Select Close
TLS. For details, see Configuring the Scopia TIP Gateway in Scopia Management
38.
Enabling the TLS Connection in Scopia Management
shown in Figure 52: Adding the B2bFQDN element
Figure 51: Enabling H.235 call support
on page 73. In a redundancy
on page
on page 72.
Securing Your Video Network Using TLS | 72