Printing A List Of Department Management Conditions - Muratec mfx-2200 User Manual

To make copies

Basic copy (page 2-5)
1
When you press <Copy> to switch to the copy mode, or press
<Reset> during the copy mode, the department code entry screen
appears.
2
Enter the department code using the numeric keys and press [Enter].
If you press [Cancel], the department management entry screen
disappears. When you press <Start>, it appears again.
3
After entering the department code, you can make copies normally.
NOTE
• U p to 9 digits can be entered for a department code. Note that you need not enter
the first digits 0.
Ex. 000044500  44500
• T he entered department code remains valid for about 3 minutes after the operation.
We recommend you press <Reset> after making copies to prevent unauthorized use.
Printing a list of department management
conditions
• You can check the copy and fax operating status, and the total copy cost.
• Y ou can protect the department management list from being copied (page
6-21).
1
Press <Menu>, select "List" using the cursor keys and press [Enter].
2
Select "Settings" using the cursor keys and press [Enter].
3
Select "Department List" using the cursor keys and press [Enter].
5-6
DB2-90290-60.indb 6
Dept. Management
44500_
Clear Cancel Enter
Fax Menu
Dialing Opt. List
Tx Report
TTI Select
Settings Close Enter
4/4
2007/02/02 12:33:30