Key Displays And Functions On The Lcd - Muratec mfx-2200 User Manual

Key displays and functions on the LCD

Touch panel keys

Press these keys to set a function to open the setting screen. After setting
the function, the setting option is displayed on the key.
You can change the touch panel key contents displayed on each standby
screen (page 8-52).
Cursor keys

Used to switch screens or set the contrast.
<Screen change>
[Cancel], [Close], [Enter]

[Cancel] cancels the function or number specified on the screen and closes
that screen.
[Close] closes the screen on other screens except setting.
[Enter] decides the menu and opens the setting screen. Also, [Enter] sets a
function or numerical value to close the screen.
Cancel
DB2-90290-60.indb 19
Doc.Type
Photo
 Setting option
Lightest
1/2
Close Enter
<When you cannot select the key>
Sec. Rx
<Contrast>
Normal Darkest
Off
1-19
2007/02/02
1
12:31:30