Muratec mfx-2200 User Manual page 314

4
Press [Yes].
Press [No] to return to step 3.
5
Perform the operation you want to program.
•
•
P ress [Yes] to program the step, then proceed to step 7. Press [No] to
6
To finish programming, press <Macro Program>.
7
Enter a title.
•
•
8
Press [Enter] to finish programming.
•
•
8-44
DB2-90290-60.indb 44
1:Not Registered
Do you want to enter/edit?
After registering the process,
select <Macro> to save.
Yes No
Up to 60 steps can be programmed.
I f you program over 60 steps, the "Too many commands. Would you
like to enter?" message is displayed.
return to the standby screen without programming the step.
Edit Title 20/ 60
Number
Sort Copy Reduce 81%_
Clear Cancel Enter
Up to 60 characters can be entered.
F or details about entering characters, refer to "Entering Characters"
(page 1-29).
T o change the programmed operations, start again from the
beginning of the process.
O perational mistakes or procedure changes while programming will
be also programmed.
2007/02/02 12:34:02