Changing A Macro Name - Muratec mfx-2200 User Manual

NOTE
If you press <Start> in the middle of the operation, the following message is displayed
Include Start/Enter?
Press [Yes] to program the steps (operations) that have been completed to include
<Start>. Press [No] to program the steps (operations) up to just before <Start>.
• You can use this function as follows:
W hile programming the transmitting operation, press [No], excluding <Start>
in a macro. Then, when you press the programmed macro key, all steps just
before <Start> is pressed will be performed. After that, you can set the delayed
transmission and so on.
I f you press [Yes] and include <Start> in the macro, the fax will be automatically
transmitted. Therefore, you cannot set anything such as a delayed transmission.
[Example] Transmission
A.
B.
A. <Start> excluded
B. <Start> included

Changing a macro name

You can change the titles of the programmed macro keys.
1
2
DB2-90290-60.indb 45
Yes No
Fax Ready Fax Mode
2 Apr 2007 13:30 Memory:100%
Resol. Contrast ScanSize
Enter Fax Number
Auto 1/2
Normal Normal
1234567890
_
Prefix:
Clear Cancel
Perform to this step
Press <Macro Program>.
Select "Edit Title" using the cursor keys and press [Enter].
Macro
Edit Title
Close Enter
Enter
2/2
General Settings
8
Document
Transmit
scanning
Perform to this step
8-45
2007/02/02 12:34:04