Printing The User Usage Management List - Muratec MFX-2590 Administrator's Manual

Printing the User Usage Management List

Prints a list of the number of pages each user has used for each mode, and total results
for the charges and communication times.
The following information is included on the user usage management list.
• The charge per page for copies, faxes, scans, and prints.
• The total charge and total communication time for all users
• The total communication time for
• The total number of pages and total charge of faxing for
Note
• The number of pages and communication times for internet faxes are added to the
fax items.
• Only the items set to ON in User Usage Management are printed in the list.
page 2-35.)
• A maximum of 999,999 pages and a maximum time of
minutes, 59 seconds) can be counted.
• For information on resetting the counters, refer to "
(See page 2-39.)
• If you want to print the device usage status for a specific user only, print the list
from OfficeBridge. For details, refer to Chapter 3, "Usage Management" in the
OfficeBridge Guide.
1
Press <Setting>.
2
Press the [List] tab
3
Press [User / Cost].
4
Select [ON] to enable duplex printing, or [OFF] to disable it.
5
Select [ON] to enable combined printing, or [OFF] to disable it.
6
Press [Yes].
1-34 Outputting Lists
guests and regular users
.
guests and regular users
999:59:59 (999 hours, 59
Erasing the Accounting
(See
Data".