Registering An F-Code Security Box - Muratec mfx-2200 User Manual

Registering an F-code security box

1
2
3
4
5
6
DB2-90290-60.indb 19
Select "Secure Box" and press [Enter].
F-Code Box Reg.
Secure Box
Bulletin Box
Relay Box
Close Enter
Enter a sub-address using the numeric keys and press [Enter].
F-Code Box Reg.
Enter Sub-Address
0123456789_
Clear Cancel Enter
• Up to 20 digits can be entered for sub-addresses. You can enter only
numbers.
• I f you enter an incorrect number, press [Clear] to delete it and then
enter the correct one.
• You cannot register the same sub-address as one for other boxes.
Enter an I.D. code (4 digits) using the numeric keys and press
[Enter].
F-Code Box Reg.
Enter I.D.Code
* _ ***
Clear Cancel Enter
The I.D. code will not be displayed anywhere. Make a record not to
forget it.
Select "Box Name" and press [Edit].
Enter a box name and press [Enter].
Enter Box Name
Lower case
Service Division _
Clear Cancel Enter
• Up to 16 characters can be entered.
• For details about entering characters, refer to page 1-29.
Set a password entry and hold time as necessary.
16/ 16
4
4-19
2007/02/02 12:33:10