Displayed Icons - Muratec mfx-2200 User Manual

Displayed icons

Displays the set function with a pictogram. Each icon shows as follows:
Icons displayed in the copy mode

Sort copy
Repeat copy
Margin
Card Copy
NOTE
• For the duplex copy function, the duplex print unit is required.
• For the mix copy function, the ADF is required.
• For the booklet copy function, the duplex print unit and ADF are required.
Icons displayed in the fax mode

NOTE
The icon of fax advanced functions is displayed on the fax standby screen in the
following cases:
• When you configure the different setting from the default setting value
• When you set the advanced communication
• When you set "Scan Size" to other than Auto
• When you set other than even magnification (100%) in "Enlarge Transmission"
• W hen you set the different TTI from the standard TTI of the User Install in "TTI
Select"
• W hen you set the different settings from setting values of the security function in
"ID Transmission" or "Closed Transmission"
1-18
DB2-90290-60.indb 18
Combine copy
Series copy
Erase center
Speed dials (001 to 056) corresponding the one-touch keys
Speed dials (057 to 200) not corresponding the one-touch keys
Advanced fax functions
Duplex copy
Booklet copy
Mix copy
2007/02/02 12:31:29