Replacing The Stamp (Option) - Muratec mfx-2200 User Manual

Replacing the Stamp (Option)

If the stamp ink becomes light, replace the stamp as follows:
NOTE
• D o not directly touch the stamp surface. If the ink adheres to your hands, wash
with water immediately.
• P lease use the stamp authorized by Muratec.
• I f the ADF is not installed, you cannot use the stamp.
1
Open the platen cover.
2
Open the left side of the document pad.
Be sure to open only the left side. Leave the right side as it is.
3
Pull the lever and pull out the stamp unit.
9-8
DB2-90290-60.indb 8 2007/02/02 12:34:16