Blocking Junk Faxes
You can block junk faxes in a number of ways: receiving faxes only from the
numbers registered in the speed dial, and rejecting faxes from your registered
numbers.
• T o block junk faxes, you can select from these three modes:
Mode 1:
T his mode blocks receptions from destinations not registered in the speed dial.
The machine compares the lower 4 digits of the registered fax number with
the destination machine ID and, only if they are matched, receives the faxes.
Mode 2:
T his mode blocks receptions from destinations you have registered. Register
the lower 4 digits of the destination fax number. Up to 50 destinations can be
entered.
Mode 3:
T his mode combines Mode 1 and Mode 2. The machine blocks faxes from any
destinations not registered in the speed dial. Even if the destinations are
registered in the speed dial, however, the machine blocks the reception from
the destinations you registered in the number list.
OFF
This does not block junk faxes.
: Incoming numbers
: Numbers registered in the speed dial
: Numbers registered as junk fax numbers
DB2-90290-60.indb
17
Mode 1
Mode 2
Receive
Not receive
Not receive
Receive
Mode 3
Not receive
Not receive
6-17
2007/02/02
6
12:33:39