To set the erase Tx document
When the erase Tx document is set to "On", documents are deleted after
polling transmission.
13
14
To enter an I.D. code
You need to enter an I.D. code to print out stored documents, etc. Make a
record not to forget it.
15
16
17
DB2-90290-60.indb
23
Select "Erase Tx Doc" using the cursor keys and press [Edit].
Select "On" or "Off " using the cursor keys and press [Enter].
Erase Tx Doc
Off
On
Cancel
Select "I.D.Code" using the cursor keys and press [Edit].
Enter an I.D. code (4 digits) using the numeric keys and press
[Enter].
F-Code Box Reg.
Enter I.D.Code
* _ ***
Clear
Cancel
If you enter an incorrect code, press [Clear] to delete it and then enter
the correct one.
To continue to register other F-code boxes, press [Close], then repeat
from step 3 of "Registering an F-code box" (page 4-18).
Press <Reset> to return to the standby screen.
Enter
Enter
4
4-23
2007/02/02
12:33:12