Copy Procedure; Basic Copy - Muratec mfx-2200 User Manual

Copy Procedure

Basic copy

NOTE
• T he default copy settings are as follows: Zoom 100%, Paper: Auto, Document
type: Text, Contrast: Normal, Sort: OFF.
• W hen paper is set to auto, paper is automatically selected according to the
document size. The selected paper sizes are A3, B4, A4, A4 , B5, B5 , A5, or
A5 . Other paper sizes are not automatically selected. When you select paper
manually, press [Paper] to select the cassette or bypass tray in which your
desired paper is loaded (page 2-9).
• W hen "Copy Mode (Prohibition)" (page 8-38) is set, you cannot copy.
1
2
3
4
DB2-90290-60.indb 5
Press <Copy>.
Load your document on the document glass or the ADF.
• For details on loading documents, refer to "Loading Documents" (page
1-59).
Set each copy setting as necessary.
• I n basic functions, you can set the paper selection, zoom, scanning
quality, scanning contrast and sort. For details on setting each
function, refer to "Basic Functions" (pages 2-8 to 2-16).
• W hen you use the advanced functions (combine copy, series copy,
repeat copy, mix copy, margin, erase center, duplex copy, booklet
copy, card copy), press <Menu> to select the desired function. For
details on setting each function, refer to "Advanced Functions" (pages
2-17 to 2-49).
Enter the number of copies using the numeric keys.
Copy Ready
Memory:100%
Paper Zoom Doc.Type
Auto 100%
• Y ou can set from 1 to 999. Without setting the number of copies, one
copy is made.
• If you make an incorrect entry, overwrite it with the correct entry.
Set 12
Text 1/2
Basic
2
2-5
2007/02/02 12:31:54