Interrupt Copy - Muratec mfx-2200 User Manual

Interrupt copy

You can interrupt a job currently in progress to copy other documents.
NOTE
• T he interrupt copy function is available while scanning the copy documents or
printing the copies.
• Y ou cannot interrupt when using the advanced copy functions or setting the
devices.
• You cannot interrupt during fax transmission or reception.
• During the interrupt mode, <Interrupt> illuminates.
1
NOTE
• W hen you interrupt while scanning the documents, remove said documents.
• W hen you were scanning the documents using the ADF, press <Stop> to output the
documents.
2
NOTE
To cancel the interrupt mode, press <Interrupt>.
3
4
IMPORTANT
When the interrupt copy ends, press <Interrupt> to get out of interrupt mode. The
interrupt mode cannot be automatically shut off.
NOTE
• W hen you interrupt while scanning documents, following the screen message, load
the documents before you interrupt and press [Scan Nextpage]. Press [Scanning
End] to copy only the scanned documents.
• A suspended print job restarts when the interrupt copy ends.
DB2-90290-60.indb 47
Press <Interrupt>.
<Interrupt> illuminates, and the job currently in progress is
interrupted.
Load the documents you want to interrupt and copy. Then set other
copy functions as necessary.
Press <Start> to start the interrupt copy.
When the interrupt copy ends, remove the documents and press
<Interrupt>.
<Interrupt> turns off.
Advanced
2
2-47
2007/02/02 12:32:25