Selecting The Paper Before Copying - Muratec mfx-2200 User Manual

Selecting the paper before copying

Select the cassette in which your desired paper is loaded before copying. When
you copy onto the paper which cannot be (is not) loaded in the paper cassette,
use the bypass tray.
You can select the paper as follows:
• Auto
A utomatically select the paper cassette in which the appropriate paper
• Paper cassette
Manually select the cassette in which your desired paper is loaded.
• Bypass tray
L oad the desired copy in the bypass tray and select it. Load the paper
1
2
3
4
5
DB2-90290-60.indb 9
is loaded based on the document size and the specified ratio. To allow the
bypass tray to be selected, you need to set it in advance (page 8-30).
which cannot be loaded in the paper cassette, postcards, or custom paper
etc. (page 1-48)
Load your document and press <Copy>.
Set the document type and contrast as necessary (page 2-10).
Press [Paper].
Select the paper to copy on using the cursor keys and press [Enter].
Paper
Auto BP:B5
1 :A4
2 :B4
Cancel
When the ratio is set to auto, and set paper to auto, the ratio is changed
to 100%.
Enter the number of copies using the numeric keys.
Copy Ready
Memory:100%
Paper Zoom Doc.Type
1:A4 100%
• You can set from 1 to 999.
• Without setting the number of copies, one copy is made.
Press <Start> to start copying.
Enter
Set 25
Text 1/2
Basic
2
2-9
2007/02/02 12:31:56