Muratec mfx-2200 User Manual page 212

3
Press <Menu>.
4
Select "F-Code Tx" using the cursor keys and press [Enter].
5
Enter the sub-address of the F-code box registered in the other
machine and press [Enter].
6
Enter a password using the numeric keys and press [Enter].
•
•
7
Press [Close] to return to the standby screen.
When the F-code transmission is set, the icon of the advanced functions
is displayed. To change the sub-address or password, return to step 3.
•
8
Enter the destination fax number and press <Start>.
•
•
4-30
DB2-90290-60.indb 30
Fax Menu
Fax Forward Fax & Copy
Enlarge Tx Polling
F-Code Polling F-Code Tx
Settings Close Enter
F-Code Tx
Enter Sub-Address
123456789_
Clear Cancel Enter
F-Code Tx
Please enter a password
*11221122*_
Clear Cancel Enter
Passwords can be entered with up to 20 numerals, * or #.
I f a password is not required, press [Enter] without entering
anything, and proceed to step 7.
Press <Reset> to cancel the F-code transmission setting.
Y ou can use the numeric keys, one-touch keys, speed-dials, address
book, and group.
U p to 230 destinations can be specified. (Up to 30 destinations can be
specified using numeric keys.)
2/4
2007/02/02 12:33:16