Performing The Dial Double-Push Transmission - Muratec mfx-2200 User Manual

Performing the dial double-push transmission

• F or manual transmission, "Dial double-push" does not work.
• A re-entry screen appears only if you used the numeric keys to enter the
destination number. You need not re-enter a destination entered by using a
one-touch key or speed dial.
• I f the destination includes a symbol like a pause (/P), you need to include the
symbol in the re-entry.
• If the display is not in fax mode, press <Fax> to switch to it.
1
2
3
4
5
DB2-90290-60.indb 13
Load your document and press <Fax>.
For details on how to load documents, refer to "Loading Documents"
(page 1-59).
Set the resolution and contrast as necessary.
For the setting procedure, refer to "Setting the resolution/contrast" (page
3-13).
Enter a destination using the numeric keys, and press [Enter] or
<Start>.
Enter Fax Number
1234567890
_
Prefix:
Clear Cancel Enter
The reentry screen for the entered fax number appears.
Reenter the destination you previously entered with the numeric
keys and press <Start>.
Security function
For confirm. enter again
1234567890
_
Clear Cancel Enter
To perform the broadcast transmission, press [Enter] and repeat from
step 2.
6
6-13
2007/02/02 12:33:37