Registering An F-Code Relay Box - Muratec mfx-2200 User Manual

Registering an F-code relay box

1
Select "Relay Box" using the cursor keys and press [Enter].
2
Enter a sub-address using the numeric keys and press [Enter].
•
•
•
3
Enter the destination and press [Enter].
You can specify destinations as follows: (Cannot specify using the
numeric keys)
•
•
•
•
•
4
Select "Box Name" and press [Edit].
5
Enter a box name and press [Enter].
•
•
4-24
DB2-90290-60.indb 24
F-Code Box Reg.
Secure Box
Bulletin Box
Relay Box
Close Enter
F-Code Box Reg.
Enter Sub-Address
345345345_
Clear Cancel Enter
U p to 20 digits can be entered for sub-addresses. You can enter only numbers.
I f you enter an incorrect number, press [Clear] to delete it and then
enter the correct one.
Y ou cannot register the same sub-address as one for other boxes.
Speed Dial(001-200)
Please Enter the number
S0 _ 01:Kyoto Head Office
Clear Cancel Enter
U sing the one-touch keys  Press the one-touch key for your desired
destination.
Using the speed dial  Enter the speed dial using the numeric keys.
U sing the group  Press [], [Group], enter the group number using
the numeric keys, and press [Enter].
To specify more than one destination, press [], [Brdcast.].
To check or delete the registered destinations, refer to page 4-27.
Enter Box Name 12/ 16
Lower case
Tokyo Office _
Clear Cancel Enter
Up to 16 characters can be entered.
For details about entering characters, refer to page 1-29.
2007/02/02 12:33:13