Muratec mfx-2200 User Manual page 367

6 Scanner Settings
DB2-90290-60.indb 5
5135 Quick Memory Tx
5137 ECM Mode
5139 Service Mode
5141 Dial Prefix
5143 OB transmission setup*1
5145 Default Address Book*1
5147 Mail priority*1
5149 Divide Tx Setting*1
5151 Recv.Time Stamp
601 Default Settings
page 8-25
603 Scan Box
You can set a name and I.D. code for a box where a scanned document is stored.
(Not displayed if the optional OfficeBridge has been installed.)
rotated to A4 for scanning and transmitted.
If you set this to ON, fax transmission for
multiple documents starts in the order of
pages that can be scanned and stored.
If you set this to ON, any part of a document
that could not be transmitted correctly due to
a line error will be automatically resent.
Do not set.
You can put a number registered before a
destination number for dialing.
You can collectively switch ON or OFF the
OfficeBridge received fax forwarding function.
You can select the address book type displayed
first on the fax standby screen.
If you set this to ON, you can display the
Internet Fax-related keys (Mail) first on the
fax standby screen.
When you divide the scanned multi-page
documents into one page for transmission
(divide transmission), you can set whether to
combine the transmission history in one
transmission or divide it per page.
If you set this to ON, the received date and
time can be printed with the word "Received"
at the header of the received document.
6011 Document Type
You can set the default document type for scanning.
6015 Resolution
You can set the default resolution for scanning.
6013 Contrast
You can set the default contrast for scanning.
6017 ScanSize
You can set the default scan size of a
document.
6019 File Format*1
You can set the default save file format of a
scanned document.
6021 Div. Tx*1
You can set whether to divide scanned
multi-page documents onto single pages and
transmit each page as a separate document
(divide transmission).
10
10-5
2007/02/02 12:34:32