One-sided copying of duplex documents
Copy the duplex documents onto one side of separate sheets of paper using
the ADF.
1
2
3
4
5
NOTE
The output copied images depend on the document loading direction. For details, refer
to "Document loading direction (duplex documents one-sided copying)" (page 2-28).
6
7
8
9
10
DB2-90290-60.indb
27
Load your document on the ADF and press <Copy>.
Press <Menu>.
Select "Duplex Copy" using the cursor keys and press [Enter].
Select "2 1sided" using the cursor keys and press [Enter].
Duplex Copy
1->2sided Book(Face)
2->2sided Book(F&B)
2->1sided
Cancel
Select "LeftRight" or "Top" according to the document binding position.
When the images are vertically the same on the front and back sides of
the document, select "LeftRight".
When the images are vertically reversed on the front and back sides of
the document, select "Top".
Duplex Copy/2->1sided
DocBind
:LeftRight
Cancel
Press [Enter].
The duplex copy icon (
Set other functions as necessary.
Press <Start>.
When scanning the front side of the document is complete, the
following screen is displayed.
Load the document with the back side upward on the ADF.
Set duplex document
Next Loading
Direction
Stop
Start
Press <Start>.
Enter
Top
Enter
) is displayed on the standby screen.
1/2
Advanced
2
2-27
2007/02/02
12:32:10