Starting The Copy Job - Fuji Xerox DocuCentre S2110 User Manual

Starting the Copy Job

1
Press the <Start> button.
Important
If document is placed in the document feeder, do not press down on the document while it is being fed
through the machine.
Note
If a problem occurs, an error code appears in the status machine diagram. For information on error codes,
refer to "Error Code" (P.189).
Placing document on the document glass
Copying multiple sets of documents
If any of the following features are set, a copy job may not be started after loading a
document due to the blinking <Last Original> button.
Collated: On
2 Sided: 1
Pages per Side: 2 Pages or 4 Pages
ID Card Copy: On
In this case, press the <Last Original> button after scanning the last document to start
copying.
1
After all the documents are scanned, press the <Last Original> button to start copying.
<Start> button
2 Sided or 2 2 Sided
<Last Original> button
Overview of Copy Operations
89
5