Step 5 Confirming The Copy Job In Job Status - Fuji Xerox ApeosPort-VII C7788 Quick Reference

5 Basic Operations
Note
When using the document feeder, load the next document after the device has finished scanning the first
document.
When [Next Original] is displayed on the screen and no operation is performed for a certain period of time,
the device automatically assumes that there are no more documents.
You can change the number of copies by selecting [Change Quantity] that is displayed after selecting
[Pause].
3
Load the next document.
4
Select [Start].
If you have more documents, repeat steps 3 and 4.
5
When all documents have been scanned, select [Last Original].

Step 5 Confirming the Copy Job in Job Status

If copies are not output after you start the copy job, the job may be in pending status. You
can confirm the job status on the [Job Status] screen.
1
Select [Job Status] on the Home screen.
2
Confirm the job status.
102