Motor Assembly, Cr Removal - Epson Stylus Pro 5000 Service Manual

Stylus Pro5000

4.2.5.8 Motor Assembly, CR Removal

1. Remove the PS Unit. (Refer to section 4.2.5.6)
2. Remove the timing belt hanging on the pinion of "Motor Assembly, CR".
(Refer to Figure4-28)
3. Remove 4 CBS screws(3x6) securing "Mounting board, CR" to "Frame,
Main, Rear", and remove "Motor Assembly, CR" with "Mounting board,
Motor, CR". (Refer to Figure4-29)
$'-8670(17
In case of replacing "Motor Assembly, CR", refer
to Chapter5 and perform "Bi-D Adjustment".
Rev.A
Chapter4 Assembly and Disassembly
"Motor Assembly, CR"
Timing Belt
Pinion
Figure 4-28. Timing Belt Removal
"Motor Assembly, CR"
CBS (3x6)
Figure 4-29. Motor Assembly, CR Removal
4-17