Terminology And Conventions - Epson Stylus Pro 5000 Service Manual

N
x
Preface

Terminology and conventions

The term " network administrator" refers to the person responsible for maintaining the
network at the customer site.
The term "Control Panel" refers to the area on the front of the RIP Station 5000
including the green/red activity light, the lens, the display window (LCD—liquid crystal
display), and the buttons to the right of and below the display window.
The term " PC-compatible" refers to any IBM PC or compatible computer running
Windows over MS-DOS
The term "100BaseT" is used throughout this manual to refer to 100BaseTX.
The term "parallel port" refers to the Parallel In port for connection to a PC-compatible.
The term "printer interface port" refers to the Parallel Out port for connection to the
printer.
: The note indicator highlights important messages and additional information.
OTE
The caution icon indicates a need for special care and safety when handling the
equipment.
Precautions
Always observe the following general precautions when installing and servicing the
RIP Station 5000:
1. Report any shipping damage.
If there is any evidence of shipping or handling damage to the RIP Station 5000 packing
boxes or their contents, save the damaged boxes and parts, call the shipper immediately
to file a claim, and notify your authorized service/support center.
2. Never alter an existing network without permission.
The RIP Station 5000 will probably be connected to an existing Local Area Network
(LAN) based on Ethernet
computer, existing laser printers, and other equipment. Never disturb the LAN by
breaking or making a network connection, altering termination, installing or removing
networking hardware or software, or shutting down networked devices without the
knowledge and express permission of the system or network administrator or the shop
supervisor.
®
.
®
hardware. The network is the link between the customer's