Epson Stylus Pro 5000 Service Manual page 129

Stylus Pro5000
15. Install a plain washer(6.2x0.5x17,S/Na) to axis "A".
16. Install a leaf spring(6.2x0.15x15, S/Na) to the same axis.
(Refer to Figure4-100)
9
CHECK POINT
When installing a leaf spring(6.2x0.15x15,S/Na), its
convex side should face to the mechanism frame.
17. Set a leaf spring(6.2x0.15x15, S/Na) to the same axis.
(Refer to Figure4-100)
18. Set "Cam, ASF" to the same axis. (Refer to Figure4-101)
9
CHECK POINT
Although there is phase between "Cam, ASF" and
surrounding gears, it is not necessary to arrange
them at this point.
Rev. A
Leaf Spring
(6.2x0.15x15,S/Na)
Axis"A"
"Plain Washer(6.2x0.2x
21, L/Na)" "Plain Washer(6.2x0.5x
17, S/Na)"
Figure 4-100. Before installing "Cam, ASF"
"Cam, ASF"
Figure 4-101. Installing "Cam, ASF"
Chapter4
4-53