Epson Stylus Pro 5000 Service Manual page 123

Stylus Pro5000
3. In case of separating "Hopper Lock Transmission Gear Assembly" into
"Gear,18.144" and "Lock, Hopper, Transmission", insert 2 holes on the
"Lock, Hopper, Transmission" to 2 dimples on the "Gear, 18.144" and
assemble them. (Refer to Figure4-87)
WARNING
If "Gear, 18.144" and "Lock, Hopper,
Transmission" are combined in wrong direction,
the printer will be unable to operate correctly and
go to fatal error with abnormal sound, when it is
turned on.
4. Push out "Axis, Paper Return, Cam" toward arrow direction in Figure4-88
from the back of the mechanism by finger, and insert "Hopper Lock
Transmission Gear Assembly" under the condition that "Axis, Paper
Return, Cam" and bush are stable. (Refer to Figure4-88)
"Gear,8.144"
Dimples
"Lock, Hopper,
Transmission"
Figure 4-87. Combining "Hopper Lock Transmission Gear Assembly"
Rev. A
After 2 parts are
combined.
"Axis, Paper Return, Cam"
Figure 4-88. Installing "Hopper Lock Transmission Gear Assembly"
Chapter4
Bush
Push out from
back of mecha-
nism.
4-47