Epson Stylus Pro 5000 Service Manual page 30

EPSON Stylus Pro 5000
T
Paper check mode
This setting decides to turn the paper check function on or off. For
Stylus Pro5000, it is necessary to match the lever located paper feed
cassette(tray) above to the presently used paper type (media type)
and its size. If the PC which supports bi-directional communication is
used, it is not necessary to make this paper check setting
effective(on), because the user can change the lever positions on the
cassette, according to the error message on the PC screen.
However, if the user uses the PC which does not support the bi-
directional communication, it is necessary to set this mode on the
printer body, since he/she can not check the error message on the
computer screen.
•Operation:
Cleaning SW + Power on to enter this mode.
•To change paper check mode setting On/Off:
Reset SW
•Save setting:
Press Eject switch or turn off the power.
•Setting and LED indicator:
Paper check On→ Black ink LED On.
Paper check Off→ Cyan ink LED On.
•Function:
1)Cleaning SW +Power on to enter this
mode→2)Power LED blinks, Cassette1 LED
turns on→3)Ink LED indicates current
setting→ 4)Change paper check On/Off by
Reset SW.
[After completing the setting, if the power is turned off]
1)Save setting→2)Exit mode→3)Power off
[After completing the setting, if Eject switch is pressed]
1)Save setting→2)Exit mode→3)Idle state
T
ECP Mode
•Operation:
Reset SW + Cleaning SW + Power On to enter
this mode.
•To change ECP mode On/Off:
Reset SW
•Save setting :
Turn off the power or press the Eject SW
Rev.A
•Setting and LED indicator:
ECP mode off→Cyan LED on
ECP mode on→Black ink LED on.
•Function:
1)Reset SW+ Cleaning SW+ Power on to
enter this mode→2)Power LED turns on and
Cassette1LED blinks→
3)Indicate the current setting by blinking ink
LED.→4)Change ECP On/Off by Reset SW.
[After completing the setting, if the power is turned off]
1)Printer escapes from the selected paper check
mode.→2)Printer goes to the power off condition.
[After completing the setting, if Eject switch is pressed]
1)Printer escapes from the selected paper check
mode. →2)Printer goes to the ordinal printing mode(idle state).
Chapter1 Product Description
1-18