Download Print this page

Epson Stylus COLOR 1520 Service Manual: Printer Mechanism Unit Disassembly; Carriage (cr) Motor Assembly Removal

Color ink jet printer.
Hide thumbs

Advertisement

EPSON Stylus COLOR 1520

3.2.10 Printer Mechanism Unit Disassembly

This section describes how to disassemble and reassemble the units and parts in the M-4160 printer
mechanism.
3.2.10.1
Carriage (CR) Motor Assembly Removal
1.
Remove the printer mechanism unit. (Refer to 3.2.6.)
2.
Release the timing belt by removing the extension spring.
3.
Disengage the timing belt from the pulley on the CR motor assembly.
4.
Turn the CR motor assembly counter clock wise in the order indicated with arrows to disengage the
joint with the base frame assembly. Then remove the CR motor assembly by moving it toward the
bottom edge of the motor frame.
Base Frame Asssembly
5.
Disconnect the CR motor assembly connector cable from the connector on the CR motor assembly.
3-16
CR Motor
Drive Pulley
Timing Belt
Figure 3-12. CR Motor Assembly Removal
Connector Cable for the CR Motor
A
B
C
Extension Spring
Rev. A

Advertisement

Table Of Contents

   Also See for Epson Stylus COLOR 1520

   Related Manuals for Epson Stylus COLOR 1520

Comments to this Manuals

Symbols: 0
Latest comments: