Adding Paper Guide Roller Unit - Epson Stylus Pro 5000 Service Manual

EPSON Stylus Pro 5000

1.3 ADDING PAPER GUIDE ROLLER UNIT

Here explains installing and removing Paper Guide Roller Unit, which can be
installed to the paper feed cassette. Paper Guide Roller Unit is designed to
improve the credibility of paper feeding for large exclusive papers (especially
glossy paper), such as A3 or Super A3/B,.
Table 1-23. Parts Code List
Parts Name
Paper Guide Roller Unit
[Installing Paper Guide Roller Unit]
Step1. As it is shown in Figure1-4, insert the yellow side of the unit, which is
located at left side of Paper Guide Roller Unit, into the yellow spaced
of paper feed cassette, and insert the other hook into the hole on the
paper feed cassette. (Refer to Figure1-4)
WARNING
When installing Paper Guide Roller Unit to the paper
feed cassette, be careful not to involve the
protection board for signal cable of paper type/size
sensor.
Step2. Push the Paper Guide Roller Unit hard until it clicks and the unit is
attached completely.
Rev.A
Parts Code
1040445
Chapter1 Product Description
Protection board for signal cable of
paper type/size sensor
Paper Guide Roller Unit
Paper Feed Cassette
Hook
Figure 1-4. Installing Paper Guide Roller Unit
1-25