Epson Stylus Pro 5000 Service Manual page 143

Stylus Pro5000
48. Install "Gear,27". (Refer to Figure4-125)
49. Install "Combination Gear,18,32.4", and fix it with "E" shaped ring.
(Refer to Figure4-125)
50. Install "Gear,67.8". (Refer to Figure4-126)
51. Install "Gear,67.6". (Refer to Figure4-126)
52. Install "Tension Spring,8.49" into between "Gear,67.6" and "ASF Gear
Train Cover Assembly". (Refer to Figure4-126)
53. Install "Reinforcing board, Gear,67.6". (Refer to Figure4-126)
54. Install "Axis, Arm Lifter" so that its convex side faces front.
(Refer to Figure4-126)
55. Install "Rotary Damper Set" and fix it by one CBS screw(3x6).
(Refer to section 4.3.1, Figure4-71)
Rev. A
"Gear,27"
"Combination Gear,18,32.4"
Figure 4-125. Installing the rest parts of "Frame Assembly, Middle,
Right"(2)
"Gear,67.6"
"Tension Spring,8.49"
Convex side should face front.
Figure 4-126. Installing the rest parts of "Frame Assembly, Middle,
Right"(3)
Chapter4 Assembly and Disassembly
"E" shaped ring
"Gear,67.8"
"Reinforcing board, Gear,67.6"
"Axis, ArmLifter"
4-67