EPSON Stylus Pro 5000
[Removing Paper Guide Roller Unit]
Step1. Looking at the front side of paper feed cassette from its bottom,
release the big hook, which is located under its right side(paper type
lever), as it is shown in Figure1-5. (Refer to Figure1-5)
Step2. Looking at the front side of paper feed cassette from its bottom,
release the hook by inserting a minus driver into 2 small hooks from
their sides, which are located under the left side of paper feed
cassette(paper size lever), and remove Paper Guide Roller Unit.
(Refer to Figure1-6)
Rev.A
Big Hook
Figure 1-5. Paper Guide Roller Unit Removal (1)
Minus Driver
2 small hooks
Figure 1-6. Paper Guide Roller Unit Removal (2)
Chapter1 Product Description
Minus Driver
1-26