Epson Stylus Pro 5000 Service Manual page 134

Stylus Pro5000
31. Check the operation of "Frame Assembly, Middle, Right" by following
procedures. (Refer to Figure4-111)
Step.A Rotate "Gear,35.4" manually to left direction, and check that
"Gear,64" for driving sub-roller rotates left direction and the
the motive power is transmitted to the edge gears.
Step.B When rotating "Gear,35.4" to right direction manually,
make sure that the clutch works and slips by itself.
Step.C When rotating "Gear,32" to right direction manually, the
motive power is transmitted to "Cam, Hopper Lock" and also
the paper return lever comes out and in correctly.
Rev. A
"Lever Assembly, Planetary,
Sub Cam"
"Gear,35.5"
"Gear,64"
"Gear,32"
Slipping
"Gear,64" rotates reversive, and motive power is transmitted
to "Lever Assembly, Planetary, Sub Cam"
"Cam, Hopper Lock" rotates correctly, and paper return lever
works.
Figure 4-111. Checking operation of "Frame Assembly, Middle, Right"
Chapter4
"Cam, Hopper Lock"
4-58