Epson Stylus Pro 5000 Service Manual page 130

Stylus Pro5000
19. Remove the positioning pin which is inserted between "Cam, Hopper
Lock" and "Combination Gear,18.144,24".
20. Install "Torsion Spring,3.92" to "Lever, Stopper, ASF". Hang the tip of the
shorter leg to the hook of "Lever, Stopper, ASF".
(Refer to Figure4-102)
21. Install "Lever, Stopper, ASF" to the same axis which "Gear,32" is
installed, and hang the tip of longer leg of "Torsion Spring,3.92" to the
hook of "Frame Assembly, Middle, Right". (Refer to Figure4-103)
22. Insert the pin of "Solenoid, ASF" to the long hole on the "Lever, Stopper,
ASF". (Refer to Figure4-103)
Rev. A
"Lever, Stopper, ASF"
Hook
"Torsion Spring,3.92"
Figure 4-102. Setting "Lever, Stopper, ASF"
"Solenoid, ASF"
"Gear,32"
Pin
Long Hole
Hook on the frame
Tip of longer leg of
"Torsion Spring,3.92"
Figure 4-103. Installing "Lever, Stopper, ASF"(1)
Chapter4
"Lever, Stopper, ASF"
4-54