EPSON Stylus Photo R340/350
2.3.23 Removing the Front Paper Guide and EJ Roller
Left Side of
Idle Roller Holder
EJ Frame Assy.
Figure 2-91. Removing the Front Paper Guide and EJ Roller Assy. (1)
Disassembly and Assembly
Right EJ Frame Shaft Guide
Right Side of
Right EJ Link
Left Side of the Printer
Left EJ Link
Parts/Components must be removed to remove the Front Paper Guide and
EJ Roller Assy.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing,
Rear Housing, Main Board Assy., ASF Assy., Shaft Assy. Holder,
Printer Mechanism, APG Assy., Print Head, Carriage Unit, CD-R Guide Assy.
Release the tab ( ) of the Right EJ Link from the groove of the Right EJ
Frame Shaft Guide, and remove the Right EJ Link.
Remove the flat washer that secures the right side of the EJ Frame Assy.
When performing the next step, be careful not to lose the
C A U T I O N
Compression Spring 1.27 as it comes off when the tension of the Idle
Roller Holder is reduced.
Release the PF Timing Belt from the Spur Gear 37.242 and the Spur Gear
Remove the flat washer that secures the Spur Gear 41.38 and pull out the Spur
When performing the next step, be careful not to damage or deform
C A U T I O N
the Star Wheels incorporated in the EJ Frame Assy.
Remove the EJ Frame Assy. in the order and orientation shown in
Remove the flat washer that secures the Left EJ Link and slide the Left EJ