Main Assembly 8 (Case Unit); Paper Roll Receive Rollers, Upper Case, Guide Roller And Switch Panel Assemblies - Epson TM-U200 series Technical Manual

C o n fid e n tia l
7. Insert the connectors you connected in step 6 into the slit in the auto-cutter cover. Insert the
cable wires of the auto-cutter into the other slit in the auto-cutter cover.
The other slit
8. While aligning the dowel, install the auto-cutter cover, and secure it with the screw. Arrange
the cable wires so that they come through the cut portion shown in the illustration.
CBS-tite (M3x5)
(0.59 to 0.78 N • m (6 to 8 kgf • cm)]

Main Assembly 8 (Case Unit)

Paper roll receive rollers, upper case, guide roller, and switch panel assemblies
1. The lead wires of the auto-cutter assembly should be arranged as shown in the second part
of the illustration below.
2. Apply G-31 to both of the paper roll receive rollers.
3. Attach the paper roll receive rollers to the lower case.
Rev. A
Slit
Auto-cutter cover
TM-U200 Series (Type B) Technical Manual
Auto-cutter cover
Cut portion
Disassembly, Assembly, and Adjustment 5-39