Canon iR7086 Series Service Manual page 668

Chapter 17
***: up graded version
Sub item
TRM-CTR Use it to enable/disable display of the message for replacement of the trimmer blade on the user screen
settings
0: do not display (default); 1: display
TRM-CTRH enabling/disabling display of the trimmer blade replacement message on the user screen
settings
0: do not display (default); 1: display
BND-CTR for future use
BND-CTRH for future use
MIN-PRC Coin manager minimum value setting
***
This determines the minimum value handled by the coin manager which is connected. For instance, the service technician inputs "10"
if the minimum value supported by the Japanese yen coin manager is 10 yen.
This item takes effect only when 4 is set for ACC>COIN.
Additional note
When a number from 1 to 4 (Euros, pounds, Swiss francs, dollars) is set for COPIER>OPTION>ACC>UNIT-PRC, a fractional
monetary unit can be input. For instance, an input of "50" signifies 50 cents ($0.50).
Setting range: 0 to 9999
[Factory setting/value after clearing RAM: 10]
MAX-PRC Coin manager maximum value setting
***
This determines the maximum value handled by the coin manager which is connected. An error screen is displayed if a value lower
than the smallest unit is input when inputting the charge amount using initial settings/registration. For instance, the service technician
inputs "8900" if the maximum value supported by the Japanese yen coin manager is 8900 yen.
This item takes effect only when 4 is set for ACC>COIN.
Additional note
When a number from 1 to 4 (Euros, pounds, Swiss francs, dollars) is set for COPIER>OPTION>ACC>UNIT-PRC, a fractional
monetary unit can be input. For instance, an input of "50" signifies 50 cents ($0.50).
Setting range: 0 to 9999
[Factory setting/value after clearing RAM: 8800]
CC-SPSW Use it to change the I/F support level for the control card (CC IV/CC V).
settings
0: do not support (default); 1: support (priority on speed); 2: support (control by priority on upper limit)
If set to '1',
suspension of printing may not be accurate based on the upper limit owing to the priority given to the maintenance of performance of
the printer engine.
If set to '2',
suspension of printing is possible based on the upper limit, but the printer engine performance may drop depending on which source
of paper is selected.
UNIT-PRC Unit price setting for coin vendors
***
Sets unit price for coin vendors.
Setting values
0: yen
1: euro
2: pound
3: Swiss franc
4: dollar
[Factory settings and after RAM clear: 0]
<INT-FACE>
Sub item
IMG-CONT Use it to indicate the connection of a PS print server unit.
settings
0: PS print server unit not connected (default); 1 to 3: not used; 4: PS print server unit connected
AP-OPT Use it to enable/disable printing from a PS print server unit application (PrintME).
settings
0: permit printing by specific account; 1: permit printing by all accounts (default); 2: do not permit printing (permit only specific group
ID)
AP-ACCNT Use it to set a group ID for printing (job) from a PS print server unit application (PrintMe).
settings
0 to 9999999 (default: 0)
17-80
COPIER > OPTION > ACC
Description
T-17-51
COPIER > OPTION > INT-FACE
Description
Level
1
1
1
1
1
1
2
2
Level
1
2
2