Canon iR7086 Series Service Manual page 119

< Installation >
1) Disconnect the connector [1] of the paper deck from the host machine's.
2) Detach the paper deck [1] from the host machine's; then, push down the latch plate [2] of the compartment of the paper deck to open the compartment [3].
ñ{ëÃâúë§
3) Remove the three screws [1], and move the right cover [2] of the paper deck in the direction of the arrow to remove.
4) Remove the six screws [1] ; then, and remove the rear cover [2] of the paper deck.
- Check to make sure that the host machine's and the paper deck have been
installed properly.
- Take care to identify the types of screws (length, diameter) and location.
F-2-215
[2]
F-2-216
F-2-217
[1]
[1]
[3]
[2]
[1]
Chapter 2
2-61