Chapter 10
[3]
[1]
[2]
10.5.4 Developing Drive Assembly
10.5.4.1 Removing the Developing Drive Assembly
iR7105 / iR7095 / iR7086
Construction
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the drum drive assembly.
7) Remove the waste toner drive assembly.
8) Remove the two screws [1], and disconnect the connector [2]; then, de-
tach the drum fan [3].
[3]
[2]
10-14
[4]
[4]
[5]
[4]
F-10-25
F-10-26
[1]
[1]
F-10-27
9) Disconnect the two connectors [4], and remove the four screws [5]; then,
detach the developing drive assembly [6].
10.5.5 Vertical Path Drive Assembly
10.5.5.1 Removing the Vertical Path Drive Assembly
iR7105 / iR7095 / iR7086
0010-9577
Construction
1) Remove the rear cover.
2) Remove the waste toner case.
3) Remove the two screws [1], and detach the harness guide [2].
[1]
4) Disconnect the connector [3], and remove the two screws [4]; then, detach
the vertical path drive assembly [5].
[5]
[6]
[5]
[4]
[4]
[5]
F-10-28
F-10-29
[2]
F-10-30
0010-9587