Before Starting The Work; Removing The Interface Pcb - Canon iR7086 Series Service Manual

[1]

5.4.6.3 Before Starting the Work

iR7086
1) Disconnect the 3 connectors [1].
[1]
2) Remove the upper rear cover [1].
- 3 screws [2]
[1]
3) Remove the reader rear cover [1].
- 5 screws [2]
[2]
[2]
[1]
F-5-86
F-5-87
[2]
F-5-88
[1]
F-5-89

5.4.6.4 Removing the Interface PCB

iR7086
1) Remove the 4 RS tightening screws [1] and the 2 binding screws [2]; then,
detach the interface PCB cover [3].
0011-8111
2) Disconnect the 7 connectors [1] and the 2 flat cables [2], and remove the
5 screws; then, detach the interface PCB unit [4].
[1]
How to Disconnect the Flat Cable
Slide the locking lever [1] in the direction of the arrow to release; then, de-
tach the flat cable [2].
3) Remove the 9 screws [1], and detach the interface PCB [2].
[2]
F-5-90
[1]
[1] [2] [1]
F-5-91
[3] [3] [3]
[2] [2]
[1]
[4] [3]
[3]
F-5-92
[2]
[1] [1]
F-5-93
Chapter 5
0011-7974
[3]
[1]
5-29